Language
banner

Products

Home > Products > Hydrothermal Synthesis Reactor > Content
Laboratory Chemical Autoclave Stainless Steel 100ml PTFE Liner Hydrothermal Synthesis Reactors

Laboratory Chemical Autoclave Stainless Steel 100ml PTFE Liner Hydrothermal Synthesis Reactors

Package size per unit product 15.00cm * 8.50cm * 8.50cm Gross weight per unit product 3.000kg Laboratory Chemical Autocl
SHARE
Send inquiry

Description

Basic Info
Model NO. KH-100
Material Stainless Steel
Capacity 100ml
Structure Filling Tube
Pressure Negative
Agitator Model No
Tower Reactor Type No
Heating Outside Heating Device
Heat Transfer Structure Combined
Automatic Grade Automatic
Condition New
Name of Commodity Hydrothermal Synthesis Reactor
Model Kh-100
Volume 100ml
Material of Kettle SS304 Stainless Steel
Liner PTFE/Ppl
Pressure of Kettle No More Than 3MPa
Temp. Range 240/300 Degrees Celsius
Heating Rate No More Than 5c/Min
Cooling Rate No More Than 5c/Min
Advancing Working Temp 220/280 Degrees Celsius
Customization Customized Is Accept
Corrosion Resistant Yes
Net Weight 2.7kg
Gross Weight 3kg
Packing Dimension 200X200X100
Transport Package Carton Box or Plywood Box
Specification 200x200x100
Trademark WollenLab
Origin China
HS Code 8419899090
Production Capacity 1000sets/Month
Packaging & Delivery
Package size per unit product 15.00cm * 8.50cm * 8.50cm Gross weight per unit product 3.000kg
Product Description
Laboratory Chemical Autoclave Stainless Steel 100ml PTFE Liner Hydrothermal Synthesis Reactors

Introduction:hydrothermal synthesis reactor is the reactor that provides synthetic chemical substances in certain temperature and pressure conditions.Features:

1. It is made of quality non-magnetic0Cr18Ni9Ti of stainless steel.2. The kettle body and kettle cover are sealed by durable and reliable line seal structure with long-term stability to leak free seal.3. Stainless steel chassis, stainless steel kettle body, stainless steel gland, stainless steel kettle cover and extended stainless steel rods.4. With PTFE liner, double care, acid and alkali, resistant to high temperature of 200ºC5. Thickening processing PTFE cover, not easy to soften.6. Beautiful appearance, reasonable structure and easy to operate.7. Good corrosion resistance.

ModelKH-25KH-50KH-100KH-150KH-200KH-250KH-300KH-500KH-1000
Volume25ml50ml100ml150ml200ml250ml300ml500ml1000ml
MaterialSS304 Stainless Steel Kettle; PTFE/PPL Liner
Pressure≤3Mpa
Temp. RangePTFE≤240ºC PPL≤300ºC (Highest Temperature)
Heating or Cooling Rate≤5ºC/Min
RemarksAdvancing working temp: 220ºC(PTFE), 280ºC (PPL); The highest pressure is 3Mpa.
Operation Steps:1.Pour the reaction solvent into the PTFE/PPL liner and ensure the freaction solvent is less than 80% of volume.2. Make sure that the bottom gasket of reactor is in the correct position (protrusion facing down), then place the PTEF/PPL liner and upper gasket, and tighten the kettle lid with a screw.3. The hydrothermal synthesis reactor is placed in a heater and heated to a desired temperature (less than the specified safe use temperature) according to the specified temperature increase rate.4. The kettle lid could be opened when you confirm that the temperature in the kettle is lower than the boiling point of the reaction solvent. When the temperature is to be cooled at the end of the reaction, it must be operated strictly in accordance with the specified cooling rate to facilitate safety and the service life of the reactor.5. After confirming that the temperature in the reactor is lower than the boiling point of the reaction solvent, please loosen the kettle lid with a screw, and then open the kettle lid.6. The hydrothermal synthesis reactor should be cleaned in time after use to avoid rust. The Sealing part of kettle and kettle lid should be carefully cleaned and protected from damage.Our Services:

Prev: CE 10L Small Lab Chemical Hydrolysis Single Layer Glass Reactor with Electric Heating Bath

Next: 1-5L Single Layer Pyrex Borosilicate Tank Stirred Heated Glass Reactor

Our Contact

Categories
Related products