High Temperature Heat Oven for Materials Motor Insulation Drying Test

Basic Info

Model NO.	YPO-072
Control	Controller
Weight	100-500Kg
Power Source	AC380V
Oil Cylinder Position	Under
Temp.Constancy	+/- 0.3 Degree Celsius
Internal Size(WHD)	400450400 mm
Controller	Taiwan Caho
Temperature Range	Room Temp.+10°c~+200°c
Internal Material	Stainless Steel
Insulation	Fiberglass Wool
Circulation	Circle Fan
Certification	Ce
Warranty	12 Months
Service	Customization
Transport Package	Strong Wooden Case
Specification	72 Litres
Trademark	Yuan Yao
Origin	Guangdong, China
HS Code	9032100000
Production Capacity	100 Sets/Month

Product Description

High Temperature Heat Oven for Materials Motor insulation drying Test

1. Scope of applicationIt is suitable for dipping and drying of white blank stators of series motors.3. Material: melamine dao acid 1038 impregnated insulating varnish.4. Process4.1 Pre-baking: After testing, the white blank stator is put into the oven, and the pre-baking temperature is set to 60ºC±5ºC. When the temperature reaches the required temperature, keep it for 30 minutes.4.2 First vacuum dehumidification: Turn on the vacuum pump, and after the vacuum degree reaches -0.095MPa, keep it for 2-3 minutes to prepare for dipping.4.3 Dipping paint: After the dipping paint surface is required to be 3-5 cm higher than the white blank winding stator, keep it for 10-20 minutes, and prepare to paint back after checking the paint surface without bubbles in the sight glass.4.4 Leaking paint: After finishing the paint back, let the paint drain for 20-40 minutes, withdraw the remaining paint and prepare for the first baking.4.5 The first baking: the temperature is set to 70ºC±5ºC, when the temperature reaches the required temperature, keep it for 20-30 minutes to prepare for the second vacuum dehumidification.4.6 Second vacuum: Turn on the vacuum pump to slowly reach -0.08Mpa in the drying cylinder. (Observe the surface of the workpiece from the sight glass. The vacuum speed should not be too fast, otherwise the surface of the workpiece will easily produce bubbles and affect the assembly.)4.7 The second baking: After the vacuum dehumidification is completed, the temperature control is set to 120ºC±5ºC, and when the temperature reaches the required temperature, keep it for 120 minutes.4.8 Cooling: Turn off the heater, cool the workpiece with cold air, and prepare to leave the box when the internal temperature of the dryer reaches below 60°C.

1 Circulation: Circle fan
2 PU&fiberglass wool
3 Two sets of moveable disd
4 PID control system

Description:
Precision Oven is applied tothe industrial and mining enterprises, laboratories, research units for drying, baking, melting and sterilization test. And used to test its performance in the case of high temperature, thermostat change, such as electrician electronics, automobile and motorcycle, ship, universities, scientific research institutes and other related products, parts and materials.

Package and Deliver:

Package: Strong wooden cases suitable for a long distance shipment.
Delivery: In 15-20 working days after receipt of L/C or T/T down payment.

Specification

1. Digital controller
2. High quality
3. Easy operating, maintenance quickly
4. With view window
5. PID control system

Features

1. Furnace temperature measuring, instructions and automatic control.
2. With simple operation, the temperature control precision higher characteristic.
3. Attached with two sets of moveable desired to be adjusted high and low at your display.
4. Easy to set temperature, easier to operate.
5. PID control system, double side overheating protection, safe and reliable.
6. Heating is by compulsory circulation ventilation, temperature raising is fast and spread even.
7. The packing of box insulation is molded by silicone, high-temperature enduring & never aged attached with observation view window, easy to be used.
8. Adopt computerized electronic digital control, precise and reliable.

Except Industrial oven, Dongguan Yuan Yao Electronics Technology also can supply:
Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Combined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.

If you are interested in the item, pls contact me.

Model		YPO-072	YPO-270	YPO-480
Internal Dim.W×H×D(mm)		450×400×400	600×900×500	800×1000×600
External Dim.W×H×D(mm)		870×1200×550	1050×1650×740	1200×1700×840
Temp. Range		Room Temp.+10°C~+200°C(300°C)
Performance	Temp.Constancy	±0.3°C
	Temp.Uniformity	±0.1°C AT 200°C;±1.5ºC AT300°C
	Indication Resolution	0.1°C/1°C
	Heat-up Time	Approx.60min
Material	Exterior	Iron Sheet+Baked Enamel
	Interior	SUS#304 stainless steel plate
	Insulation	Fiberglass Wool
Systems	Circulation	Circle Fan
	Heating	Chrome Steel Strip Wire Heater
	Controller	Electric Digital Control+S.S.R.
Door		Single-Wing
Other Components		Environmental Control Indicator Lights, Experiment Separation Shelves(2 pcs).

Safety Devices		Overheating Prevention Circuit breaker, Control System,Breakdown Indicator Light.

Power Source(K.W.)		AC 1Ψ 220V ; 3Ψ 380V 60/50Hz

High Temperature Heat Oven for Materials Motor Insulation Drying Test

Products

High Temperature Heat Oven for Materials Motor Insulation Drying Test

Basic Info

Product Description